Show Code

/*
 *  eHealth sensor platform for Arduino and Raspberry from Cooking-hacks.
 *
 *  Description: "The e-Health Sensor Shield allows Arduino and Raspberry Pi 
 *  users to perform biometric and medical applications by using 9 different 
 *  sensors: Pulse and Oxygen in Blood Sensor (SPO2), Airflow Sensor (Breathing),
 *  Body Temperature, Electrocardiogram Sensor (ECG), Glucometer, Galvanic Skin
 *  Response Sensor (GSR - Sweating), Blood Pressure (Sphygmomanometer) and 
 *  Patient Position (Accelerometer)."  
 *
 *  Explanation: This example shows the way to communicate with  
 *  the Arduino using ZigBee protocol. 
 *
 *  Copyright (C) 2012 Libelium Comunicaciones Distribuidas S.L.
 *  http://www.libelium.com
 *
 *  This program is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 3 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program.  If not, see .
 *
 *  Version 0.1
 *  Author: Luis Martin & Ahmad Saad 
 */

Show Code

/*
 *  eHealth sensor platform for Arduino and Raspberry from Cooking-hacks.
 *
 *  Description: "The e-Health Sensor Shield allows Arduino and Raspberry Pi 
 *  users to perform biometric and medical applications by using 9 different 
 *  sensors: Pulse and Oxygen in Blood Sensor (SPO2), Airflow Sensor (Breathing),
 *  Body Temperature, Electrocardiogram Sensor (ECG), Glucometer, Galvanic Skin
 *  Response Sensor (GSR - Sweating), Blood Pressure (Sphygmomanometer) and 
 *  Patient Position (Accelerometer)."  
 *
 *  Explanation: This example shows the way to send a text message with 
 *  the corporal temperature using the GPRS module. 
 *
 *  Copyright (C) 2012 Libelium Comunicaciones Distribuidas S.L.
 *  http://www.libelium.com
 *
 *  This program is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 3 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program.  If not, see .
 *
 *  Version 0.1
 *  Author: Luis Martin & Ahmad Saad 
 */

Show Code

/*
 *  eHealth sensor platform for Arduino and Raspberry from Cooking-hacks.
 *
 *  Description: "The e-Health Sensor Shield allows Arduino and Raspberry Pi 
 *  users to perform biometric and medical applications by using 9 different 
 *  sensors: Pulse and Oxygen in Blood Sensor (SPO2), Airflow Sensor (Breathing),
 *  Body Temperature, Electrocardiogram Sensor (ECG), Glucometer, Galvanic Skin
 *  Response Sensor (GSR - Sweating), Blood Pressure (Sphygmomanometer) and 
 *  Patient Position (Accelerometer)."  
 *
 *  Explanation: This example how to send data using 3G shield and 
 *  making a connection to a server. 
 *
 *  Copyright (C) 2012 Libelium Comunicaciones Distribuidas S.L.
 *  http://www.libelium.com
 *
 *  This program is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 3 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program.  If not, see .
 *
 *  Version 0.1
 *  Author: Luis Martin & Ahmad Saad 
 */

// For more information about the 3G shield please see our tutorial
// in cooking-hacks web site. http://www.cooking-hacks.com

#include

char data[512];
char tosend[128];
int led = 13;
int onModulePin = 2; // the pin to switch on the module (without press on button)

int x = 0;

char name[20];

char server[ ]=»192.198.1.1″; //Your server IP address
char port[ ]=»5555″; // Your port.

void switchModule(){
digitalWrite(onModulePin,HIGH);
delay(2000);
digitalWrite(onModulePin,LOW);
}

void setup(){

Serial.begin(115200); // UART baud rate
delay(2000);
pinMode(led, OUTPUT);
pinMode(onModulePin, OUTPUT);
switchModule(); // switches the module ON

for (int i=0;i< 5;i++){
delay(5000);
}

Serial.println(«AT+CGSOCKCONT=1,\»IP\»,\»internetmas\»»);
Serial.flush();
x=0;
do
{
while(Serial.available()==0);
data[x]=Serial.read();
x++;
} while(!(data[x-1]==’K’&&data[x-2]==’O’)); //waits for response «Network opened»

}

void loop()
{
float temperature = eHealth.getTemperature();
int longitud = sprintf(tosend,»%d», temperature);

Serial.print(«AT+NETOPEN=\»TCP\»,»);
//Opens the socket with the type of protocol and the port
Serial.println(port);
Serial.flush();
x=0;

do
{
while(Serial.available()==0);
data[x]=Serial.read();
x++;
}
while(!(data[x-1]==’K’&&data[x-2]==’O’)); //waits for response «Network opened»

Serial.print(«AT+TCPCONNECT=\»»); //Connects with the server
Serial.print(server);
Serial.print(«\»,»);
Serial.println(port);

Serial.flush();
while(Serial.read()!=’K’);

Serial.print(«AT+TCPWRITE=»);
Serial.println(longitud, DEC); //Sends TCP data
Serial.flush();

do
{
while (Serial.available() == 0) {};
//Serial.println(char(Serial.read()));
} while(Serial.read()!=’>’);

Serial.println(tosend);

x=0;

do
{
while(Serial.available()==0);
data[x]=Serial.read();
x++;
}
while(!(data[x-1]==’K’&&data[x-2]==’O’));

Serial.println(«AT+NETCLOSE»); //Opens the socket with the type of protocol and the port
Serial.flush();
while(Serial.read()!=’K’);

while(1);

}

Show Code

/*
*  Copyright (C) 2012 Libelium Comunicaciones Distribuidas S.L.
*  http://www.libelium.com
*
*  This program is free software: you can redistribute it and/or modify
*  it under the terms of the GNU General Public License as published by
*  the Free Software Foundation, either version 3 of the License, or
*  (at your option) any later version.
*
*  This program is distributed in the hope that it will be useful,
*  but WITHOUT ANY WARRANTY; without even the implied warranty of
*  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
*  GNU General Public License for more details.
*
*  You should have received a copy of the GNU General Public License
*  along with this program.  If not, see .
*
*  Version 0.1
*  Author: Alejandro Gállego
*/

int led = 13;
int onModulePin = 2; // the pin to switch on the module (without press on button)

int x = 0;

char name[20];

void switchModule(){
digitalWrite(onModulePin,HIGH);
delay(2000);
digitalWrite(onModulePin,LOW);
}

void setup(){

Serial.begin(115200); // UART baud rate
delay(2000);
pinMode(led, OUTPUT);
pinMode(onModulePin, OUTPUT);
switchModule(); // switches the module ON

for (int i=0;i < 5;i++){
delay(5000);
}

Serial.println(«AT+CCAMS»); //starts the camera
while(Serial.read()!=’K’);

Serial.println(«AT+CCAMSETD=640,480»); //sets VGA (640*480) resolution
while(Serial.read()!=’K’);

Serial.println(«AT+FSLOCA=0»); //stores the image file in the 3G module
while(Serial.read()!=’K’);

}

void loop(){

delay(1500);
while(Serial.available()!=0){
Serial.read();
}
Serial.println(«AT+CCAMTP»); //takes a picture, but not saved it
while(Serial.read()!=’K’);

Serial.println(«AT+CCAMEP»); // saves the picture into C:/Picture
Serial.flush();
while(Serial.read()!=’/’);
while(Serial.read()!=’/’);

x=0;
do{
while(Serial.available()==0);
name[x]=Serial.read();
x++;
}while(x < 19);

while(Serial.read()!=’K’);
Serial.println(name);

Serial.println(«AT+CCAME»); // stops the camera
while(Serial.read()!=’K’);

while(1);

}